View larger image
KCA406 IPL Hair Removal Device for Home Use
IPL Hair Removal
Intense pulsed light (IPL) uses a form of light based therapy which sends out numerous wavelengths which is then absorbed by the melanin in the hairs causing it to generate heat. This then destroys the hair follicle sufficiently to remove the hair and prevents future hair growth.
1, Specification
Feature:Hair Removal
Spot size:3CM2
Wavelength:>530nm
indicator:LED
Lamp life:50,0000 flashes
2, Product features
1.500,000 Shots/Pulse Cartridge.
2.Home Pluses Light (IPL) technology, 3 functions available: Hair removal, Skin Rejuvenation, Acne Clearance.
3. Skin tone sensor embed, Test your skin first then set up your journey to removal hairs.
4. Safety sensor embed, Begin to work only get contacted with your skin firmly.
5. Big spot size: 4.5cm²
3, Use Steps
1 .Before every treatment, clean the Skin Contact Surface and filter
2. Connect power adapter and switch on handset.
3. Press power switch for 2 seconds [Please hold Flash Button for 2 seconds to adjust to the automatic mode].
Note: Each mode is explained further below.
4. First level for skin rejuvenation and the inner fan turns on automatically (it is normal that the handset and filter
become warm during use).
5. Press the power switch to adjust energy level 1-2-3-4-5-6-7-6-5-4-3-2-1.
6. Place Skin Contact Surface on skin at an angle of 90 ° to ensure it contacts with the skin completely and press
the Flash Button
7. When you press the Flash button, the handset will flash once and be accompanied by a gentle warm tingling
feeling. You will feel the warmth of the flash.
8. Move the handset to the next hair removal area, the LCD screen will show “OK” when it is ready, then repeat.
9. After use, please turn off the handset and turn off the power.
Tip: After the handset has been turned on, please adjust it to the appropriate mode and level to stimulate skin
rejuvenation and remove hair. If first time user, please refer to 3.3 as reference to skin test.
Tip: To ensure you have treated all areas, issue flash close to the prior flash.
Note: Slight redness, dry, itchy tingling or warm feeling on skin reactions are harmless. You can use ice to
compress and relieve symptoms.
Two modes:
Manual mode: After handset and skin are in contact correctly, press the Flash Button to release a single flash.
Automatic mode: After handset and skin are in contact correctly, press Flash Button for 2 seconds which will
change settings on LCD screen to show automatic mode. Flash will automatically go only when it has contact to the
skin.
Intense pulsed light (IPL) uses a form of light based therapy which sends out numerous wavelengths which is then absorbed by the melanin in the hairs causing it to generate heat. This then destroys the hair follicle sufficiently to remove the hair and prevents future hair growth.
1, Specification
Feature:Hair Removal
Spot size:3CM2
Wavelength:>530nm
indicator:LED
Lamp life:50,0000 flashes
2, Product features
1.500,000 Shots/Pulse Cartridge.
2.Home Pluses Light (IPL) technology, 3 functions available: Hair removal, Skin Rejuvenation, Acne Clearance.
3. Skin tone sensor embed, Test your skin first then set up your journey to removal hairs.
4. Safety sensor embed, Begin to work only get contacted with your skin firmly.
5. Big spot size: 4.5cm²
3, Use Steps
1 .Before every treatment, clean the Skin Contact Surface and filter
2. Connect power adapter and switch on handset.
3. Press power switch for 2 seconds [Please hold Flash Button for 2 seconds to adjust to the automatic mode].
Note: Each mode is explained further below.
4. First level for skin rejuvenation and the inner fan turns on automatically (it is normal that the handset and filter
become warm during use).
5. Press the power switch to adjust energy level 1-2-3-4-5-6-7-6-5-4-3-2-1.
6. Place Skin Contact Surface on skin at an angle of 90 ° to ensure it contacts with the skin completely and press
the Flash Button
7. When you press the Flash button, the handset will flash once and be accompanied by a gentle warm tingling
feeling. You will feel the warmth of the flash.
8. Move the handset to the next hair removal area, the LCD screen will show “OK” when it is ready, then repeat.
9. After use, please turn off the handset and turn off the power.
Tip: After the handset has been turned on, please adjust it to the appropriate mode and level to stimulate skin
rejuvenation and remove hair. If first time user, please refer to 3.3 as reference to skin test.
Tip: To ensure you have treated all areas, issue flash close to the prior flash.
Note: Slight redness, dry, itchy tingling or warm feeling on skin reactions are harmless. You can use ice to
compress and relieve symptoms.
Two modes:
Manual mode: After handset and skin are in contact correctly, press the Flash Button to release a single flash.
Automatic mode: After handset and skin are in contact correctly, press Flash Button for 2 seconds which will
change settings on LCD screen to show automatic mode. Flash will automatically go only when it has contact to the
skin.
Lead Time
2 days
Payment Types
Port
Shenzhen
Main Export Markets
Europe, North America, Latin America, Middle East, Asia, Australia, Africa